Uncategorized

AdTech provides efficient degassing and filtering equipment that includes chambers with respective metal inlets and outlets, and supports in a sequentially spaced relationship. Among them, the position of the port enables the flux gas emitted therefrom to be dispersed and permeated through the medium. The pore size and permeability of filter-type media are different, AdTech […]

The purpose of molten Alu purification is to remove the gas (hydrogen) and solid impurities (alumina) in the aluminum liquid. Purification of molten aluminum requires the use of a substance that can separate the alumina from the molten metal and drive hydrogen into the molten pool, but does not dissolve in the molten aluminum itself. […]

In view of the fact that after the aluminum material is melted, it will continue to oxidize and inhale, causing secondary pollution, so the time of molten Alu purification treatment should be arranged before casting and rolling, it is best to start casting and rolling after purification treatment. For this reason, the molten Alu purification […]

The caster tip is a key component of the aluminum strip casting and rolling machine, and its quality directly affects the thickness, quality, and yield of the aluminum strip. Proper caster tip installation and alignment determine melt distribution uniformity, strip surface finish, and dimensional tolerance across the full width of the cast product. This guide […]

Molten Alu usually contains entrained and dissolved gaseous and solid impurities that are harmful to the final cast product. These impurities may affect the final cast product after the molten metal has solidified, which may reduce the ductility of the final product. One way to remove gaseous impurities from molten Alu is through degassing. The […]

Aluminum Metal Foam Filter in the filter box can intercept both large particles and small particles with the formation of surface deposition. In addition to considering the actual production quality requirements for aluminum products, the selection of aluminum metal foam filter must also consider the aluminum flow rate of the flume during casting and rolling, […]

Aluminum has been widely used in industrial applications, such as transportation, packaging, automotive, aerospace, electronics. Inclusion content has long been the main quality standard for many products. As the critical application of inclusions increases, such as products with low final thickness and high surface quality, its importance continues to increase. With the further improvement of […]

Aluminum is primarily used to produce pistons, engine and body parts for cars, beverage cans, doors, siding, and aluminum foil. It may also be used as sheet metal, aluminum plate and foil, rods, bars and wire, aircraft components, windows, and door frames. The leading users of aluminum include the container and packaging industry, the transportation […]

In view of the fact that the aluminum material itself will bring in certain inclusions and will be polluted in the melting process, it must be purified to obtain clean aluminum liquid and provide qualified aluminum melt for the next processing. The method of purifying molten aluminum in the furnace can only remove the aluminum […]

The application of ceramic foam filters has been extended to various industries, from automobiles to consumer electronics. The manufacturing unit selects these components according to its technical specifications showing different strength and resistance values. Not all of these filters are used in the same process. In fact, these filters have two common shapes: round and […]