Blog

High temperature refractory flow tube and floats are used in conjunction to stabilize the casting parameters of the molten metal and facilitate flow control. The high temperature refractory flow tube is integrally made of high silicon molten material, which has strong corrosion resistance and no pollution to the molten metal. It can be used multiple […]

Ceramic foam filters have become the most widely used filter material in the world’s aluminum industry, including Assan Alüminyum foundry. Assan Alüminyum, one of the world’s leading manufacturers in the flat-rolled aluminum industry, has been producing coil & sheet, foil, and pre-painted aluminum products. High-quality ceramic filters play a very important role in improving the […]

The development of new shapes and new materials for casting tips is very important for Speira aluminium foil casting and rolling. The casting tips can make Speira molten aluminium have a uniform flow along the width of the plate. At the same time, the casting tips should be conducive to assembly and adjustment, and the […]

The main function of aluminium smelter flux is to remove slag and gas, and is widely used in aluminum furnaces and foundries. The slag removal ability of the aluminium smelter flux is determined by the adsorption and dissolution of the oxidized inclusions in the melt by the flux and the chemical interaction between the flux […]

Casthouse Flux is mainly a mixture of chloride and fluoride salts and other additives. Generally, the covering flux requires a small surface tension and a low melting point; the flux used for slag removal requires a large surface tension for molten aluminum, but a small surface tension for oxidized slag; refining flux is required to […]

The aluminium melting flux should be thoroughly dried beforehand, so as to remove the moisture, which can improve the refining effect and prevent explosion accidents when the flux is added to the molten aluminum. The chloride flux has high hygroscopicity. The flux must be dried carefully before use. The removal of adsorbed water and crystal […]

There are many types of melting furnace flux used in aluminum alloy casting production, which can be divided into two categories: refining agent and covering agent. The fluxes used for degassing and slag removal are collectively referred to as refining agents, and the fluxes used to prevent the melt from oxidative burning and gas absorption […]

The aluminium foundry fluxes and the molten aluminum must be in contact with each other to the greatest extent, so that the flux can exert the maximum refining effect in the molten aluminum refining process. In order to achieve the best results, the aluminium foundry fluxes should be stirred into the molten aluminum to make […]

The molten metal aluminium filter is mainly ceramic foam filter. The ceramic foam filter is a filtering device that uses ceramic foam as the filter medium. Ceramic foam is an open-cell mesh with a sponge-like structure for filtering aluminum melt. The ceramic foam filter is installed in the molten metal aluminium filter box between the […]

The foam ceramic filter plate is widely used in aluminum foundries because of its convenient use, good filtering effect and low price. In developed countries, more than 50% of aluminum alloy melts are filtered by foam ceramic filter plates. The ceramic foam filter plate is generally a filter with a thickness of 50 mm and […]