Ceramic Foam Filter China Aluminium can effectively reduce the pollution of molten aluminum, no broken bits drop out. Superior thermal shock resistance, improve the erosion resistance ability of molten metal. Improve the surface appearance and performance, purify molten aluminum. AdTech Metallurgical Materials Co., Ltd has been focusing on research, development, production and marketing of the […]
The aluminum cast ceramic foam filters have a complex foam ceramic structure, which can effectively block slag. The aluminum cast ceramic foam filters use a three-dimensional network structure and an organic foam with connected pores as a carrier, and invades it into a special ceramic slurry with thixotropy, and adopts a special roll extrusion process […]
Foundry alumina ceramic filter mainly for filtration of aluminum and alloys in cast houses. The filter can effectively remove inclusions, reduce trapped gases and provide laminar flow, so the filtered metal is significantly cleaner. Cleaner metal results in better quality castings, less scrap and fewer embedding defects, which contributes to the bottom line. Features of […]
Although most of the slag inclusions are removed from the aluminum melt during refining, some fine slag particles, especially those below a few microns, are difficult to remove by furnace refining and online refining, and they are still suspended in the aluminum melt. Strict filtration treatment is required before casting and rolling. The aluminum melt […]
Choosing the best ceramic foam filter plate is an important task, and the size of the filter plate depends on the flow rate and total amount of the filtered metal. Semi-continuous casting mainly considers the flow of metal, while continuous casting mainly considers the total amount of metal. The size of the ceramic foam filter […]
At the deep bed filtering device outlet, the melt’s quality is better after a series of online treatments such as degassing and filtering. The slag sample is relatively clean, and there are a small number of inclusions at the interface of the filter and the melt. In the initial casting stage of the deep bed […]
Foam ceramic filter board has advantages: high dimensional accuracy, high mechanical strength, stable chemical composition, corrosion resistance to liquid aluminum and its alloys, no phosphorus and environmental friendliness, purifying aluminum liquid, improving aluminum quality, reducing defects, reducing defective rate, reducing cost, increasing production efficiency, and using simple and flexible size from 40mm to 600mm to […]
The manufacture of aluminum alloys meets the requirements for higher purity of cast metals to improve the quality of the final products (foils, blocks, ingots, rods, profiles). Therefore, molten aluminum filtration is the most effective method, which can reduce the manufacturing waste rate of the final product and improve its quality. Pollution of hard metals […]
The ceramic foam filter for casting can effectively remove large inclusions in the liquid aluminum, and absorb micron-sized fine inclusion particles. It plays a role in improving surface quality, product performance, microstructure, and yield. Molten aluminum filters are widely used in aluminum profiles, aluminum foil, aluminum alloy and other production fields. The foam filter uses […]
